1 dat a sheet: clm-ds04-LMH6 rev 0c the cree led module LMH6 with cree truewhite technology is the ideal choice for commercial lighting applications where high cri, luminous fux and effcacy are required, such as restaur ants, retail and hospitality lighting. cree truewhite technology: ? a better way to generate white light that utilizes a patented mixture of unsaturated yellow and saturated red leds. ? proprietary optical system utilizes a unique combination of refective and refractive optical components to achieve a uniform, comfortable appearance. pixelation and direct view of leds is eliminated. ? technology beneft C high cri and effcacy allows customers to avoid making tradeoffs between energy effciency and light quality as compared to other lighting alternatives. ? marketing beneft C cree logo on lens enables brand marketing value on fnal design. dali features ? dali (digital addressable lighting interface) dimming ? dali device type 1 (iec 62386 part 102) for the ac/dc power supply (dali version 2006) ? onboard thermal management features ? cree truewhite technology ? 2000 & 2900 lm @ 3000-k & 4000-k cct ? dali or 1C10-v dimming to 5% of rated light output ? comprehensive solution with driver electronics, optics and thermals ? snap-lock tabs for easy trim mounting ? designed to last at least 50,000 hours at l 70 ? cree ies lm-80 data in support of u.s. doe energy star ? qualifcation ? the LMH6 (230-v) complies with multiple international standards ? integral splice compartment ? both asian and european union wire access plates supplied cree ? led module LMH6 with cree truewhite ? technology data sheet cree led modules provide a simple solution for lighting designers and manufacturers to adopt best-in-class led lighting from cree. the lmh series continues crees history of innovation in leds for lighting applications and provides a comprehensive solution including patented cree truewhite ? technology to achieve an industry-leading combination of light quality and effcacy. this versatile led lighting module allows design fexibility with the beautiful color and effcacy of cree truewhite technology. a comprehensive design guide and solid-model step fles are available through the cree module sales team. this data sheet is intended to introduce you to the features and benefts of the LMH6 module. the design guide and solid model must be referenced for the thermal, mechanical and optical requirements of a successful LMH6 product design. subject to change without notice. www.cree.com/modules
2 characteristics the following table provides several base order codes for the cree led module LMH6, as well as a description of the order-code nomenclature. cct (k)* nominal luminous flux (lm) cri input power (w) input voltage (v)/freq (hz)** power factor dimming order code 4000 2000 >90 27 230/50 >.90 dali lmh060-2000-40f9-20200tw 4000 2900 >90 37 230/50 >.90 dali lmh060-2900-40f9-20200tw 3000 2000 >90 27 230/50 >.90 dali lmh060-2000-30f9-20200tw 3000 2900 >90 37 230/50 >.90 dali lmh060-2900-30f9-20200tw 4000 2000 >90 27 230/50 >.90 1C10 v lmh060-2000-40f9-20300tw 4000 2900 >90 37 230/50 >.90 1C10 v lmh060-2900-40f9-20300tw 3000 2000 >90 27 230/50 >.90 1C10 v lmh060-2000-30f9-20300tw 3000 2900 >90 37 230/50 >.90 1C10 v lmh060-2900-30f9-20300tw * refer to section below on chromaticity for more details ** input range is 220C240 v / 50C60 hz note: cree maintains a tolerance of +/- 7% on fux and power measurements form factor - light engine units = mm clm-ds04-LMH6 rev 0c cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 www.cree.com/modules copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , cree truewhite ? technology and truewhite ? are registered trademarks and the cree logo is a trademark of cree, inc. energy star ? is a registered trademark of the u.s. environmental protection agency.
3 form factor - power supply thermal management guidelines acceptable ambient starting and operating temperatures of the cree led module LMH6 are between 0c and 40c. (the lifetime and performance estimates described in this document require that the tc limit stated in this thermal management guidelines section is adhered to and only the modifcations described in this document are implemented.) the cree led module LMH6 is designed to perform in a variety of non-ic environments; however, the led module lifetime is highly dependent upon the tc (case temperature). to achieve lifetime and performance estimates and to maintain the warranty, the fnal design cannot exceed 70c at thermal equilibrium, based on the tc point (shown in the fgure on the right) where the thermocouple is placed and tested in situ. tc location units = mm clm-ds04-LMH6 rev 0c cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 www.cree.com/modules copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , cree truewhite ? technology and truewhite ? are registered trademarks and the cree logo is a trademark of cree, inc. energy star ? is a registered trademark of the u.s. environmental protection agency.
4 photometry the following photometry results are design values. absolute photometric testing at independent testing labs can be expected to vary by 7%. candela table angle lmh060-2900 lmh060-2000 0 1266 987 5 1261 979 15 1220 933 25 1119 847 35 950 704 45 783 520 55 488 333 65 242 127 75 74 55 85 7 3 90 1 1 zonal lumens summary lmh060-2900 zone lumens % lamp % fixt 0-30 979 - 34 0-40 1572 - 54 0-60 2574 - 88 0-90 2916 - 100 0-180 2916 - 100 zonal lumens summary lmh060-2000 zone lumens % lamp % fixt 0-30 745 - 35 0-40 1184 - 57 0-60 1885 - 90 0-90 2074 - 100 0-180 2074 - 100 clm-ds04-LMH6 rev 0c cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 www.cree.com/modules copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , cree truewhite ? technology and truewhite ? are registered trademarks and the cree logo is a trademark of cree, inc. energy star ? is a registered trademark of the u.s. environmental protection agency.
5 chromaticity secondary optics added to the module will reduce the light output and could also alter the color characteristics of the fnal luminaire design. the cree led module LMH6 provides high color consistency around the specifed color temperature. individual leds are tested and matched in order to meet the designed chromaticity specifcation, which is defned by the following bounding coordinates. color temp code cct (k) ccx ccy 40f 4000 0.3722 0.3739 0.3822 0.3706 0.3915 0.3857 0.3813 0.3892 35f 3500 0.3974 0.3858 0.4074 0.3823 0.4174 0.3979 0.4073 0.4016 30f 3000 0.4236 0.3969 0.4334 0.3932 0.4442 0.4093 0.4342 0.4131 27f 2700 0.4473 0.4037 0.4569 0.4000 0.4684 0.4164 0.4586 0.4203 order codes ssssss -llll -cccc -nnnnnnn luminous flux 2000 = 2000 lumens nominal cri 9 = 90+ cri po wer supply 2 = 230- v color temp 30f = 3000-k cct fo rm factor series lmh = led module t ype internal code tw = t ruewhite clm-ds04-LMH6 rev 0c cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 www.cree.com/modules copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , cree truewhite ? technology and truewhite ? are registered trademarks and the cree logo is a trademark of cree, inc. energy star ? is a registered trademark of the u.s. environmental protection agency.
|
